C2020-A-MIRR

The O.L.E. C2020 mirror gauge is ideal for connecting to our C2020 tank gauge kits. It can be found in the back/transport manager's office. It helps to prevent spillages on site when the tank is being filled and can help to prevent running out of fuel. 

It is often required for use at the remote tank filler point, allowing the tanker driver to view tank levels and or for use in the back office so the end user can also hear the alarms and to keep an eye on the tank levels.

Gauge only, tank probe/pressure sensor not supplied.

Key Features and Benefits:

• This mirror gauge allows a second gauge display in a remote location
• For use/links to our C2020 tank gauge kits
• Suitable with diesel, HVO, biodiesel, AdBlue®, water & antifreeze
• Accuracy +/-1% of tank capacity (do not confuse with other lower cost and lower accuracy gauges that are +/-1% of full-scale, on a 4m high tank, these other gauges can give a discrepancy of +/- 40mm)
• Can be set up from the front panel
• Electronic display with backlight (turns off after 1 hour)
• Weatherproof to IP55
• Gives continuous readout in litres & shows a % bar
• Power supply can be 230V, 110V or 24VDC

       Options:

• We can calibrate your gauge within 24 hours of receiving our tank questionnaire (CALIB-C2020)
• AdBlue^® is a trademark of the Verband der Automobilindustrie e.V. (VDA). HTTPS://WWW.VDA.DE/DE