Petroy.com

Cim-Tek Filtration

StokAir Tire Inflators

Maximus Equipment

  • 0 My Wish List
  • My Cart 0
main product photo

T5020-1A-3M

T5020 Tank gauge kit, 0.3m- 3m
In stock
T5020-1A-3M
T5020 Tank gauge kit, 0.3m- 3m
SKU
HY-T5020-1A-3M
T5020-1A-3M
T5020 Tank gauge kit, 0.3m- 3m
Tank gauge kit 0.3m - 5m with high-level alarm, low-level light (AdBlue® 2.75m)
  • Suitable with diesel, biodiesel up to B100, AdBlue® and antifreeze
  • Accuracy +/-0.25% of tank capacity.
  • Suits tanks 1m - 30m high, probe cable can be extended to 100m (CABLE-4-BLUE)
  • Electronic display with backlight, turns off after 1 hour
  • Gives continuous readout in L and %
  • Weatherproof to IP65
  • 1 gauge required per tank
  • Power supply can be 230V, 110V or 24VDC
  • Includes 4-20mA output and Modbus RS485 to connect to a BMS system
  • Tank probes are an electronic pressure sensor with a 1” M BSPT fitting
  • Level probes must be suspended 50mm from the bottom of the tank
  • Includes junction box to extend probe cable, on non-ATEX (TANK-KIT)
  • Bund probe (B8) or water bottom sensor (B2)
  • Relay board fits inside the gauge housing, x5 volt free outputs (R5)
  • Set up by us within 24 hours from receipt of your tank questionnaire or we
    can supply a configuration lead & software for you to set up (T4040-01)

T5020 Tank Gauge Series

Products OLE UK

Be the first to review this product
Number of boxes:
T5020-1A-3M
T5020 Tank gauge kit, 0.3m- 3m
Tank gauge kit 0.3m - 5m with high-level alarm, low-level light (AdBlue® 2.75m)
  • Suitable with diesel, biodiesel up to B100, AdBlue® and antifreeze
  • Accuracy +/-0.25% of tank capacity.
  • Suits tanks 1m - 30m high, probe cable can be extended to 100m (CABLE-4-BLUE)
  • Electronic display with backlight, turns off after 1 hour
  • Gives continuous readout in L and %
  • Weatherproof to IP65
  • 1 gauge required per tank
  • Power supply can be 230V, 110V or 24VDC
  • Includes 4-20mA output and Modbus RS485 to connect to a BMS system
  • Tank probes are an electronic pressure sensor with a 1” M BSPT fitting
  • Level probes must be suspended 50mm from the bottom of the tank
  • Includes junction box to extend probe cable, on non-ATEX (TANK-KIT)
  • Bund probe (B8) or water bottom sensor (B2)
  • Relay board fits inside the gauge housing, x5 volt free outputs (R5)
  • Set up by us within 24 hours from receipt of your tank questionnaire or we
    can supply a configuration lead & software for you to set up (T4040-01)
More Information
Subtitle T5020 Tank gauge kit, 0.3m- 3m
Write Your Own Review
You're reviewing:T5020-1A-3M

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.