Z2000-A-ATEX-A12
ATEX Z2000 Tank Gauge
Z2000-A-ATEX-A12
ATEX Z2000 Tank Gauge
SKU
HY-Z2000-A-ATEX-A12
Z2000-A-ATEX-A12
ATEX Z2000 Tank Gauge
- Suitable with petrol, kerosene, diesel, biodiesel up to B100, AdBlue® and antifreeze
- Atex certified based on the popular O.L.E C2020
- Accuracy +/-1% of tank capacity
- Suits tanks 0.3m - 3m high, probe cable can be extended to 100m
- Electronic display with backlight, turns off after 1 hour
- Gives continuous readout in L and %
- Weatherproof to IP65
- Power supply can be 230V, 110V or 24VDC
- Can connect to a BMS (building management system) using 4-20ma output
- Tank probes are an electronic pressure sensor with a 1" BSPT M fitting
- Probes rated for Zone 0 & 1
- Level probes must be suspended 50mm from the bottom of the tank
- 1 gauge required per tank
- Bund probe (B8-ATEX) or water bottom sensor
- Junction box, used to extend cable T4020-EJ, low loss vented cable Cable-4CV must be used
- Can be set up from the front panel
Z2000 Tank Gauge Series
Products OLE UK